Ivory Snowflower Lace Vest Crochet Pattern

If you’ve been searching for a statement piece that balances elegance with handmade charm, this is the one to bookmark. The Ivory Snowflower Lace Vest stands out from typical vest patterns with its distinctive fan overlay construction, creating a cascading scalloped effect that catches the light beautifully. The combination of an ivory filet mesh foundation with delicate ice blue accents gives this design a fresh, almost vintage feel that works equally well over a simple tee or a dressy blouse.

Handmade filet mesh crochet vest featuring cascading fan motifs in ivory and pale blue accent edging

What makes this vest particularly interesting is the layered construction method. Rather than working the fans directly into the mesh, you create them separately and attach them in overlapping tiers. This approach means you can customize the placement, adjust as you go, and even swap accent colors between tiers for a more dramatic ombre effect.

The finished piece has a relaxed, open-front silhouette that drapes beautifully at 86 cm from shoulder to hem. It’s designed for one adult size with an intended bust measurement of 88 to 94 cm and a finished panel width of 100 cm. If you love lace crochet and want a project that looks far more complex than it actually is, this vest delivers.

At a Glance: What You’re Making

This is an open-front sleeveless vest built on a filet mesh foundation with decorative fan overlays attached in horizontal tiers. The construction is straightforward: you work a back panel and two shaped front panels from the hem upward, seam them together at the shoulders and sides, then add the fan embellishments and finish with simple borders.

The filet mesh creates a lightweight, breathable base that’s perfect for layering. The fans, worked separately with a smaller hook, add dimension and visual interest without making the vest heavy or stiff.

Finished Measurements:

  • Back width: 50 cm
  • Each front panel: 25 cm
  • Total bust/panel width: 100 cm
  • Shoulder to hem length: 86 cm
  • Armhole depth: 22 cm

Materials and Tools

Yarn:

  • Main color (Ivory): Smooth DK weight cotton, approximately 798 g or 1756 m (yarn should yield 220 m per 100 g)
  • Accent color (Ice Blue): 120 g or 264 m of the same weight
  • If using a single color throughout, combine the totals
  • These amounts include a 15% allowance for peace of mind

Hooks:

  • 3.5 mm hook for the mesh panels and edgings
  • 3 mm hook for the fan overlays

Adjust your mesh hook size as needed to achieve gauge. The smaller hook for fans helps them hold their shape and creates a slightly denser fabric that stands out against the open mesh.

Notions:

  • Tapestry needle
  • Removable stitch markers
  • Tape measure
  • Rust-resistant blocking pins
  • Scissors

No beads, wire, or buttons are required for this pattern.

Gauge

Getting gauge right matters here because it affects both the fit and the drape of your vest.

Blocked mesh gauge: 18 underlying stitch positions and 10 rows equals 10 x 10 cm. This translates to 6 square filet cells and 10 rows.

A filet cell consists of chain 2 (ch 2) plus the next double crochet (dc). When measuring mesh width, exclude the initial edge dc.

How to make a gauge swatch:

Chain 41. Work a dc in the eighth chain from hook, then work [ch 2, skip 2 ch, dc in next ch] 11 times. You should have 12 cells including the initial skipped-chain cell, and 13 dc posts.

Continue working mesh rows until you have 16 rows total. Wash and dry flat. Measure the central 6 cells and 10 rows. If your measurements are off, adjust your hook size and try again.

Abbreviations and Special Stitches

This pattern uses US crochet terminology throughout.

  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • hdc = half double crochet
  • dc = double crochet (yarn over, insert hook, pull up loop, yarn over and pull through 2 loops twice)
  • tr = treble crochet
  • st(s) = stitch(es)
  • RS = right side
  • WS = wrong side
  • rep = repeat

sc2tog (single crochet 2 together): Yarn over and draw up a loop in each of 2 stitches, yarn over and draw through all 3 loops. This creates a decrease.

Mesh row: Ch 3 (this counts as your first dc), turn. Work [ch 2, dc in next dc] across the row. Each cell contains one ch-2 gap bounded by dc posts. Work your last dc into the top of the turning ch-3 from the previous row. The turning chain counts as an edge dc, never as an extra cell.

Picot: Ch 3, sl st in first ch.

Shell: 5 dc worked into one base stitch.

Magic ring: An adjustable yarn loop. Work your stitches around the loop, pull the tail to close it tightly, then secure the tail after joining.

Pattern Notes

Read through the entire pattern before starting. This helps you understand the construction flow and avoid surprises.

  • Row 1 is the right side (RS)
  • Work flat unless instructed otherwise
  • Brackets indicate repeats. Work the bracketed instructions only the stated number of times
  • All row numbers include the foundation row
  • Stitch counts describe cells and dc posts separately. Chain spaces are not counted as dc

Fit considerations: This pattern is designed for 6 to 12 cm of ease at the bust. It is a single size, not graded. If you need to adjust length, add or remove plain mesh rows before the armhole shaping. Each row adds approximately 1 cm to the length. Recalculate your yarn requirements if you make length changes.

This is an open lace garment and works best worn over an opaque layer.

Instructions

Back Panel

Foundation: Ch 95.

Row 1 (RS): Dc in eighth ch from hook, [ch 2, skip 2 ch, dc in next ch] 29 times. (30 cells, 31 dc)

Rows 2 through 82: Work mesh row. (30 cells, 31 dc per row)

Fasten off after the final row.

Front Panels (Make 2 Mirror Images)

Foundation: Ch 50.

Row 1 (RS): Dc in eighth ch from hook, [ch 2, skip 2 ch, dc in next ch] 14 times. (15 cells, 16 dc)

Rows 2 through 68: Work mesh row. Place a marker on one long side to indicate the neck edge. (15 cells, 16 dc per row)

Neck Shaping (worked over the final 14 rows):

Decrease 1 cell at the neck edge on odd-numbered local rows (1, 3, 5, 7, 9, 11, and 13). Work even local rows plain with no shaping.

Cell counts for local rows 1 through 14: 14, 14, 13, 13, 12, 12, 11, 11, 10, 10, 9, 9, 8, 8. Each row has the stated number of cells plus 1 dc.

To decrease at the beginning of a row: Turn, slip stitch into the ch-2 gap and the next dc, ch 3, then continue the mesh from that dc.

To decrease at the end of a row: Finish at the penultimate dc, leaving the final cell unworked.

Keep the outer (non-neck) edge straight throughout. Mirror the neck shaping on the second front panel so they are opposite. Fasten off. Each shoulder should have 8 cells and 9 dc.

Fan Overlays (Make Individually)

Use your 3 mm hook and main color yarn.

Foundation: Ch 5, join with sl st to form a ring.

Row 1: Ch 3 (counts as dc), 8 dc into ring, turn. (9 dc)

Row 2: Ch 3, 2 dc in each of next 8 dc, turn. (17 dc)

Row 3: Ch 1, sc in first dc, [ch 3, sc in next dc] 16 times. Fasten off. (17 sc, 16 ch-3 loops)

For accent color fans, use ice blue yarn for Row 3 on every second horizontal tier.

Blocking: Block each fan to 8 cm wide by 5 cm tall.

Placement: Create 6 columns of fans across the back and 3 columns across each front below the neck shaping. Position tier centers every 4 mesh rows, with each upper fan overlapping the lower fan by approximately 1 cm. For tiers above the neck taper, omit any fans that would cross the neckline or armhole edge.

Count and make your fans against the assembled vest. The typical total is 180 to 240 fans depending on placement.

Assembly

You’ll need: Main color yarn and either a 3.5 mm hook for slip stitch joins or a tapestry needle for mattress stitch.

Shoulder Seam (Seam 1):

Lay the front and back panels with right sides together. Join the outer 8 cells of each shoulder using 1 sl st per dc and 2 sl sts per ch-2 gap. Leave the center 14 back cells unjoined for the neck opening. (25 joining positions on each shoulder)

Side Seams (Seam 2):

Using mattress stitch, join each side from the hem upward through Row 60, working 1 pass per row edge. Leave the top 22 rows open for the armholes. (60 row-edge pairs on each side)

Checkpoint: Both shoulders should lie flat. Side seams should match row for row. Each armhole should measure 22 cm deep. The flat back width should be 50 cm, with each front measuring 25 cm below the neckline.

Edgings and Details

You’ll need: Ivory yarn and 3.5 mm hook for borders. Ice blue yarn and 3 mm hook for accent work. Tapestry needle.

Border Round 1:

With RS facing, work sc evenly around each armhole and around the entire neckline/front opening: 2 sc per dc row edge, 1 sc per dc post, 2 sc per ch-2 gap. Add 2 sc at each outer corner. Use sc2tog at sharp inward corners. Join with sl st. Record your actual stitch count as it depends on your edge.

Border Round 2:

Ch 1, sc in each sc around, join. Keep your tension loose enough for the edge to lie flat. The count remains the same as Round 1.

Hem Foundation:

Work sc across the lower edge(s): 1 sc per dc and 2 sc per ch-2 gap. Before seaming, the vest totals are: back 91 sc, each front 46 sc. Adjust by at most 3 evenly spaced increases or sc2tog decreases to reach a multiple of 6. Target 180 sc combined after seams.

Hem Row 1:

Ch 1, [sc in next 3 sc, picot, sc in next 3 sc] across. (180 sc, 30 picots)

Hem Row 2:

Ch 1, sc in each sc, passing behind picots. Fasten off. (180 sc)

Block the lower edging to approximately 4 cm depth.

Attaching Fan Overlays:

Pin fans in overlapping tiers with the curved scallop edge facing downward. Sew only the straight top edge and both top corners of each fan, leaving the lower scallop raised for dimension. Join adjoining fan corners with ch 3 and sl st.

Checkpoint: Edges should lie flat with no pulling. All embellishments should be securely attached. The front opening should remain functional. Fan overlap should be 1 cm with no fans obstructing the armholes.

Finishing

You’ll need: All yarn tails, tapestry needle, pins, towel, cool water. Keep a 3.5 mm hook handy for any repairs.

Pass 1: Weave each tail through at least 5 cm of dense stitches, working in two directions. Do not thread tails across open mesh gaps.

Pass 2: Soak briefly in cool water. Support the garment when lifting to avoid stretching. Press gently in a towel, lay flat, and pin to measurements. Keep front and back rows aligned.

Pass 3: Shape motifs and hem gently. Allow to dry completely. Remove pins and trim tails.

Final Checkpoint: Finished length should be 86 cm. Bust/panel circumference should be 100 cm. Back width should be 50 cm with fronts at 25 cm each below the neck taper.

Care Instructions

Follow your yarn label for specific guidance. Hand wash in cool water with mild detergent. Reshape and dry flat. Do not hang while wet as this can stretch the mesh. Avoid hot ironing.

This is an adult garment and is not intended for children. The long loops on the fans can snag, so secure every motif thoroughly. Keep loose yarn ends away from babies and pets.

Tips for Success

On working filet mesh: The rhythm of filet crochet is wonderfully meditative once you get going. Ch 2, dc, ch 2, dc. If you find your edges getting uneven, double-check that you’re working your final dc into the top of the turning chain, not into the ch-2 space.

On making many fans: You’ll be creating a lot of fan motifs for this project. Consider setting up a small assembly line. Work 10 to 15 fans at a time, then block them in batches. This keeps the process from feeling overwhelming.

On placement: Before sewing any fans permanently, pin them all in place and try the vest on (or lay it flat and photograph it). This lets you adjust spacing and ensure the visual effect is balanced.

On the accent color: The ice blue on every other tier creates a lovely striped effect. If you prefer a subtler look, use the accent only on the outermost tiers or skip it entirely for an all-ivory version.

Open front sleeveless crochet vest with layered lace fans creating elegant scalloped texture in cream yarn

Who This Pattern Is For

This vest suits confident beginners and intermediate crocheters. If you’re comfortable with basic filet mesh and can follow a simple decrease sequence, you have the skills for this project. The fan overlays are worked separately, so there’s no tricky integration to manage.

The finished vest makes a beautiful gift for someone who appreciates handmade fashion. It’s also an impressive piece to keep for yourself, perfect for layering in spring or summer, or wearing indoors year-round.

Thank you so much for choosing this pattern. It’s a joy to create something this beautiful with your own hands, and I hope you love every stitch of this vest. If you make one, I’d love to see it! Share your finished piece on Instagram or Facebook, and tag your photos so we can celebrate your work together.

Save this pattern to your Pinterest boards so you can find it whenever you’re ready to start. And if you do make this vest, drop a comment below. I’d love to hear how it turned out and see which colors you chose!

You Might Also Like

Leave a Comment

Your email address will not be published. Required fields are marked *

*