This dress pattern brings together everything you want in a statement handmade garment. A fitted bodice that actually flatters, a swirling flared skirt with real movement, and those sweet daisy appliqués at the neckline that give the whole piece personality. The construction moves from the top down, which means you can try it on as you go and adjust the length before you commit.

The ribbed texture running through the bodice and skirt creates vertical lines that look polished and professional. Sport weight cotton keeps the fabric breathable and gives it beautiful drape without being too heavy. At the same time, the structure holds its shape after washing.
Whether you are making this for a special occasion or just because you deserve something beautiful in your closet, you will love watching this dress take shape on your hook. The techniques are straightforward once you get into the rhythm, and the result looks far more complex than the actual stitch work.
About This Design
The Honey Daisy Flare Dress is a knee-length garment worked in honey gold cotton with ivory daisy motifs along the neckline. The silhouette features a round neck, short cap sleeves, a fitted waist, and a dramatically flared skirt that falls to approximately knee length.
This is a top-down raglan construction, which means you start at the neck, work the yoke with corner increases to shape the shoulders, then separate the sleeves and continue down through the bodice and skirt. This method creates a seamless upper body and allows for easy fitting adjustments along the way.
The finished measurements fit an adult bust of 84 to 88 centimeters with 4 to 8 centimeters of positive ease at the bust. The finished waist measures 80 centimeters. This is one sample size, not a graded size range, so compare these measurements to your body before starting.
| Finished Measurement | Sample Size |
|---|---|
| Bust / Waist | 92 / 80 cm |
| Neck to Waist | 40 cm |
| Waist to Hem | 50 cm + edging |
| Upper Sleeve | 33 cm |
Materials You Will Need
Yarn:
- Honey gold: 800 grams / approximately 2400 meters of sport weight (category 2) cotton or cotton blend, approximately 300 meters per 100 grams
- Ivory: 50 grams / approximately 150 meters of the same weight for the daisy appliqués
The estimated quantities include the belt, appliqués, and a modest allowance. Buy an extra 15 to 20 percent if you plan to alter the length or if your swatch comes out denser than specified.
Hooks:
- Main hook: 3.5 mm (or size needed for gauge)
- Edging hook: 3.0 mm (or size needed for gauge)
Notions:
- Tapestry needle
- Scissors
- Measuring tape
- 12 locking stitch markers
- Blocking mat and pins
- Matching strong sewing thread and needle
Optional additions:
- For beaded versions: 25 to 35 smooth 4 mm sew-on ivory pearls
- For keyhole version: one 8 mm button
- Separate opaque slip for coverage, depending on your yarn’s opacity
Gauge
Getting gauge right is essential for a garment that fits properly. Take time with this step.
Blocked main fabric: 20 stitch positions and 12 rows or rounds equals 10 x 10 centimeters with the main hook. A chain space position counts as one position in the mesh yoke. Measure ribbing relaxed, not pulled sideways.
How to make your swatch:
Chain (ch) 35. Work a double crochet (dc) in the third chain from hook and in each chain across. You should have 33 double crochets. Work 20 more rows in the bodice stitch, using chain 2 to turn each row. Wash and dry flat. Measure the central 10 centimeters away from the edges. If your gauge is off, change hook size and repeat until both stitch and row gauge are close.
Abbreviations and Special Stitches
Before diving into the instructions, familiarize yourself with these terms:
- ch = chain
- sl st = slip stitch
- sc = single crochet
- hdc = half double crochet
- dc = double crochet (yarn over, insert hook, pull up loop, yarn over and pull through 2 loops twice)
- FPdc = front post double crochet
- BPdc = back post double crochet
- BLO = back loop only
- st(s) = stitch(es)
- sp(s) = space(s)
- RS/WS = right side / wrong side
- rnd = round
- rep = repeat
- inc = increase
- dec = decrease
Special Stitch Definitions
FPdc (front post double crochet): Yarn over. Insert your hook around the post of the indicated stitch from the front, going right to left. Pull up a loop and finish as a regular double crochet. Do not also work into the top loops of that same stitch.
BPdc (back post double crochet): Same as FPdc, but insert your hook from the back instead of the front.
dc2tog (double crochet two together): Work a partial double crochet in each of the next 2 stitches, leaving the last loop of each on the hook. Yarn over and draw through all 3 loops. This consumes 2 stitches and produces 1 stitch. The sc2tog uses the same principle without the initial yarn overs.
Rib fabric: In right side rows or unturned rounds, repeat [FPdc in next stitch, dc in next 3 stitches]. On a wrong side row, use BPdc in place of FPdc to keep the rib texture on the right side. Preserve existing rib posts at a shaping edge. Use ordinary dc in any new stitch until the next full repeat can be established.
Picot: Ch 3, slip stitch into the first of these 3 chains.
Shell: 5 dc into the same specified stitch or space.
Written repeats in square brackets are worked exactly the stated number of times.
Pattern Notes
Read these notes before you begin. They will save you confusion later.
- Ch 2 at a dc row start does not count as a stitch. Work into the first stitch.
- Ch 1 at a sc row start does not count.
- Joined rounds end with a slip stitch in the first actual stitch. Never count the join.
- Do not turn joined rounds unless directed.
- Mark the first stitch and move the marker each round.
About the yoke corners:
Four ch-2 corner spaces separate the yoke segments. Corner chains are excluded from dc position totals. An increase corner is [dc, ch 2, dc] into that corner space. The two new dc belong to the adjacent segments, adding 8 positions across all four corners per round.
After the underarm split:
There are no corner spaces. Count underarm foundation chains as stitches on the next round. Work shaping stitches as ordinary dc, then resume the established texture. At each increase round, distribute the additions in plain columns. Do not double work a rib post.
A note about the design image:
The illustration is an AI-generated design guide. The written stitch route is an original interpretation of the visible features. Gauge and finished measurements take priority over the picture.
Construction Overview
The dress is worked in this order:
- Neck foundation
- Shaped yoke
- Underarm split
- Fitted bodice
- Flared skirt
- Sleeves
- Collar/neck edge and motifs
- Assembly and blocking
Fit tip: Try on over a slip after the underarm split and again at the waist. This is your chance to adjust before committing to the skirt.
Length and Width Adjustments
To adjust length: Add or remove plain rounds between shaping rounds.
To adjust width: First make the sample swatch. Each 8-stitch change adds about 4 centimeters to the circumference. Changing yoke depth affects sleeve and body counts, so record your new segment totals before continuing. Any alterations require a fresh fitting check.
Instructions
Yoke
Chain 124. Join without twisting. The round begins at the boundary between back and front.
Round 1: Ch 2; dc 44, ch 2, dc 18, ch 2, dc 44, ch 2, dc 18, ch 2; join. (124 dc; 4 corner spaces)
In each following yoke round, work the rib fabric across each segment and an increase corner into each of the four corner spaces.
For the keyhole version: Turn after Rows 2 and 3, finish Row 4 and join center front edges. Turn once so RS faces out, then work unturned rounds thereafter.
Round 2: Work the established texture and 4 increase corners. (132 positions; 4 corner spaces)
Round 3: Work the established texture and 4 increase corners. (140 positions; 4 corner spaces)
Round 4: Work the established texture and 4 increase corners. (148 positions; 4 corner spaces)
Round 5: Work the established texture and 4 increase corners. (156 positions; 4 corner spaces)
Round 6: Work the established texture and 4 increase corners. (164 positions; 4 corner spaces)
Round 7: Work the established texture and 4 increase corners. (172 positions; 4 corner spaces)
Round 8: Work the established texture and 4 increase corners. (180 positions; 4 corner spaces)
Round 9: Work the established texture and 4 increase corners. (188 positions; 4 corner spaces)
Round 10: Work the established texture and 4 increase corners. (196 positions; 4 corner spaces)
Round 11: Work the established texture and 4 increase corners. (204 positions; 4 corner spaces)
Round 12: Work the established texture and 4 increase corners. (212 positions; 4 corner spaces)
Round 13: Work the established texture and 4 increase corners. (220 positions; 4 corner spaces)
Round 14: Work the established texture and 4 increase corners. (228 positions; 4 corner spaces)
Round 15: Work the established texture and 4 increase corners. (236 positions; 4 corner spaces)
Round 16: Work the established texture and 4 increase corners. (244 positions; 4 corner spaces)
Round 17: Work the established texture and 4 increase corners. (252 positions; 4 corner spaces)
Round 18: Work the established texture and 4 increase corners. (260 positions; 4 corner spaces)
Round 19: Work the established texture and 4 increase corners. (268 positions; 4 corner spaces)
Round 20: Work the established texture and 4 increase corners. (276 positions; 4 corner spaces)
Round 21: Work the established texture and 4 increase corners. (284 positions; 4 corner spaces)
Yoke Checkpoint: You should have 84 front stitches, 58 sleeve stitches, 84 back stitches, and 58 sleeve stitches. Yoke depth should measure about 17.5 centimeters. Measure the opening and check that the yoke sits comfortably before splitting.
Underarm Split and Bodice
Rejoin yarn at the first stitch of the full front panel, immediately after a sleeve corner. Work the complete 84-stitch front, across the center front join when present, ch 8, skip 58 sleeve stitches; dc across 84 back stitches, ch 8, skip 58 sleeve stitches; join to the first body stitch. Leave the four corner spaces unworked. Do not add their chains to the body count. (184 body positions; 58 held stitches per sleeve)
The split is not counted as Bodice Round 1. Work over the chains on Round 1. Mark 8 equally spaced points, 23 stitches apart in the initial 184-stitch round. Move these markers to keep the next decreases evenly distributed.
Bodice Round 1: Work established bodice texture in every position. (184 sts)
Bodice Round 2: Work established bodice texture in every position. (184 sts)
Bodice Round 3: Work established bodice texture in every position. (184 sts)
Bodice Round 4: Work established bodice texture in every position. (184 sts)
Bodice Round 5: Work established bodice texture in every position. (184 sts)
Bodice Round 6: [21 stitches in texture, dc2tog] 8 times. (176 sts)
Bodice Round 7: Work established bodice texture in every position. (176 sts)
Bodice Round 8: Work established bodice texture in every position. (176 sts)
Bodice Round 9: Work established bodice texture in every position. (176 sts)
Bodice Round 10: Work established bodice texture in every position. (176 sts)
Bodice Round 11: Work established bodice texture in every position. (176 sts)
Bodice Round 12: [20 stitches in texture, dc2tog] 8 times. (168 sts)
Bodice Round 13: Work established bodice texture in every position. (168 sts)
Bodice Round 14: Work established bodice texture in every position. (168 sts)
Bodice Round 15: Work established bodice texture in every position. (168 sts)
Bodice Round 16: Work established bodice texture in every position. (168 sts)
Bodice Round 17: Work established bodice texture in every position. (168 sts)
Bodice Round 18: [19 stitches in texture, dc2tog] 8 times. (160 sts)
Bodice Rounds 19 through 27: Work established bodice texture in every position. (160 sts)
Bodice Checkpoint: 160 stitches equals an 80 centimeter waist. Neck to waist length should measure about 40 centimeters before any added collar. If the fit is wrong, correct it here before adding the skirt.
Skirt
Skirt Round 1: 2 dc in every waist stitch; join. (320 sts)
On ordinary skirt rounds, work the established rib or basketweave texture. On each numbered increase round below, divide the old count into the 16 blocks specified. Work each block in texture with 2 dc in its last stitch. Each increase round adds 16 stitches. Re-establish the texture over the new positions on the next round.
Skirt Round 8: [19 sts in texture, 2 dc in next st] 16 times. (336 sts)
Skirt Round 16: [20 sts in texture, 2 dc in next st] 16 times. (352 sts)
Skirt Round 24: [21 sts in texture, 2 dc in next st] 16 times. (368 sts)
Skirt Round 32: [22 sts in texture, 2 dc in next st] 16 times. (384 sts)
Skirt Round 40: [23 sts in texture, 2 dc in next st] 16 times. (400 sts)
Skirt Round 48: [24 sts in texture, 2 dc in next st] 16 times. (416 sts)
Skirt Round 56: [25 sts in texture, 2 dc in next st] 16 times. (432 sts)
All unlisted skirt rounds: Work one textured stitch in each stitch, without increases. The stitch count stays at the most recent stated total.
Final Skirt Round 60: Work texture as scheduled, including an increase if this is an increase round. (432 sts)
Skirt Checkpoint: 50 centimeters waist to hem before edging. The planned neck to hem length is approximately 90 centimeters, plus 1 to 3 centimeters for edging. Hold the garment upright for a few minutes to check cotton stretch before committing to the hem.
Sleeves (Make Two)
Sleeve Round 1: Join main yarn at underarm; work 8 dc across underarm chains, then 58 stitches in texture across held sleeve stitches; join. (66 sts)
Sleeve Round 2: Work rib texture evenly; join. (66 sts)
Sleeve Round 3: Work rib texture evenly; join. (66 sts)
Sleeve Checkpoint: 33 centimeters upper circumference and approximately 2.5 centimeters below underarm before edging. The yoke supplies additional cap sleeve coverage.
Assembly
You will need: Main color yarn (honey gold), 3.5 mm hook for joining gaps, tapestry needle, matching sewing thread, markers. Work with the garment right side out.
Pass 1: Close any small hole at the underarm corners with a short duplicate stitch pass through adjacent stitch legs. Do not tighten the opening. (2 underarms closed)
Pass 2: Secure the bottom of the placket or keyhole with 3 small sewn reinforcing stitches across the join. Keep the opening above it separate. (1 reinforced opening when present)
Pass 3: Lay the garment flat and compare sleeve seams, waist, and hem. Remove temporary construction markers after the checks. (2 sleeves matched)
Assembly Checkpoint: The garment hangs level, the underarms contain no gaps, and the neck or front opening remains usable. Check bust and waist circumference again. Never force a too-small neck opening over the head.
Edgings and Details
You will need: Main yarn and ivory accent color; 3.0 mm hook for neck and cuffs; 3.5 mm hook for motifs; tapestry needle and matching thread.
Neck Edging
Neck Round 1: Sc into each foundation stitch; place 2 sc in each of the 4 corner chain spaces to smooth the neckline. (132 sc total)
Neck Round 2: Sc in every sc, join or finish at the keyhole edge. (132 sc)
Hem Edging
Hem Round: Sc in every final skirt stitch; join. (Same count as final skirt round)
Sleeve Edging
Sleeve Edge Round (work twice per sleeve): Sc in each sleeve stitch; join and fasten off. (66 sc per sleeve)
Daisy Motifs (Make 3)
Flower Round 1: Make a magic ring, ch 1, 10 sc into ring; join and close center firmly. (10 sc)
Flower Round 2: [Sl st in next sc, ch 2, 3 dc in same sc, ch 2, sl st in next sc] 5 times; join. (5 petals; 15 dc)
Optional Layer Round 3: Behind petals, [ch 4, sl st around base of next petal] 5 times. (5 back loops)
Optional Layer Round 4: [Sc, hdc, 5 dc, hdc, sc] in each back loop; fasten off. (5 larger petals; 45 sts)
Placement: Position the three ivory daisies with gold centers along the neckline. Sew through the base and garment fabric with at least 6 small stitches. Keep the fabric flat.
For pearl arcs: Position beads 1.5 to 2 centimeters apart along the neck edge and sew each bead separately with doubled thread.
Edging Checkpoint: Edges lie flat without rippling. Buttons pass through their loops or holes. Motifs are securely sewn and do not pull the fabric out of shape.
Finishing
You will need: Matching yarn tails, tapestry needle, blocking pins and mat; main 3.5 mm hook only if a repair is needed. Use water suited to the yarn label.
Pass 1: Weave every yarn end through the wrong side of at least 6 stitches, reverse direction twice, and trim only after washing. (All ends secured)
Pass 2: Soak briefly in cool water with gentle detergent. Squeeze in a towel without twisting. Lay flat and pin the waist and skirt to the planned measurements. (1 blocked garment)
Pass 3: Let dry completely, remove pins and measure again. Support the heavy skirt when lifting. Do not hang wet cotton. (1 final measurement check)
Final Checkpoint: Bust approximately 92 centimeters, waist 80 centimeters, skirt length 50 centimeters before edging. Sleeve lengths match within 0.5 centimeters. Record any difference and your actual yarn use before making another size.
Care and Safety
Follow the yarn label for care instructions. Hand wash in cool water, support the weight of the wet garment, reshape, and dry flat. Do not wring or tumble dry unless the yarn specifically permits it. Test strong colors for bleeding before combining them with pale yarn. Remove or protect delicate beads before laundering.
This adult garment is not a toy or a children’s pattern. Beads and buttons are small parts. Check their stitching before each wear and keep them away from babies and young children. Long belts and ties can catch, so secure them during wear. Lace construction needs an appropriate opaque slip for coverage.

Tips for Success
Take your time with the yoke. Those first 21 rounds set up the entire fit of the dress. Count your corners carefully and make sure your increase corners are consistent.
Try it on. The pattern specifically recommends trying on after the underarm split and again at the waist. Cotton has weight, and you want to make sure the bodice length works for your torso before you add 60 rounds of skirt.
Block generously. Cotton can be stubborn, but it blocks beautifully. Pin it to the measurements and let it dry completely before you wear it.
Keep notes. Write down your actual gauge, any adjustments you made, and how much yarn you used. This will make future projects much easier.
This dress is a satisfying project for crocheters who want something more ambitious than a simple accessory. The ribbed texture keeps your hands busy, the shaping keeps your mind engaged, and the finished piece is something truly special.
Thank you so much for choosing this pattern. If you make it, please share your photos on Instagram or Facebook. Seeing your finished dresses would be wonderful.
Save this Honey Daisy Flare Dress crochet pattern to your Pinterest boards so you can find it when you are ready to start. And if you do make this dress, leave a comment below. Your notes help other makers decide if this project is right for them.
