Lavender Scallop Lace Dress Crochet Pattern

This design brings together classic shell lace construction with a flattering A-line silhouette that works beautifully across three sizes. The alternating shell rows create that gorgeous scalloped texture you see cascading down the bodice, skirt, and sleeves. Every detail has been considered here, from the gentle waist shaping to the keyhole back closure that adds a touch of elegance.

Full length lavender crocheted dress featuring repeating fan lace motifs from neckline to scalloped hem edge

The lavender cotton yarn gives this dress a soft, romantic quality that photographs beautifully and feels wonderful against the skin. Paired with a matching opaque slip underneath, you get coverage where you need it while still showing off all that intricate lacework. The construction is straightforward once you understand the rhythm of Shell A and Shell B rows.

You will love how this dress comes together in manageable panels. Work the bodice from waist to shoulders, the skirt from waist to hem, and the sleeves from top to cuff. Then join everything with simple seams. It is a satisfying build that lets you see real progress with every section you complete.

About This Lavender Lace Dress Pattern

This crochet dress pattern creates a knee-length garment with long sleeves and a romantic scalloped lace texture throughout. The finished piece measures approximately 87 cm (34.3 inches) from shoulder to hem before the decorative trim is added.

The dress is designed to fit adult sizes Small, Medium, and Large. Size Small fits a body bust of 78 to 80 cm with a finished bust measurement of 82 cm. Size Medium fits 87 to 89 cm with a finished bust of 91 cm. Size Large fits 96 to 98 cm with a finished bust of 100 cm. The A-line shape means the skirt gradually widens from waist to hem, giving you comfortable movement and a flattering drape.

Skill level: This pattern suits intermediate crocheters who are comfortable with basic stitches, shaping, and seaming multiple pieces together. If you have made a garment before, you will find this construction familiar.

Materials You Will Need

Gather everything before you start. Having your supplies ready makes the project flow smoothly.

Yarn: Smooth sport weight cotton or cotton-linen blend in lavender (Color A). Purchase from one dye lot to ensure color consistency across all panels.

SizeYards NeededMeters Needed
S12251120
M13501234
L15251394

These amounts include a swatching allowance and are estimates. Having a bit extra never hurts with a garment this size.

Hook: 3.5 mm (US E/4) or the size needed to achieve gauge.

Additional supplies:

  • Opaque slip in a matching lavender tone
  • Stitch markers
  • Tapestry needle
  • Tape measure
  • Rustproof pins
  • Matching sewing thread
  • Small sew-on hook-and-eye closure
  • 25 cm (10 inch) lightweight nylon coil zipper for the left side seam

Gauge Information

Getting gauge right matters for garments. Take time with this step.

Gauge: 18 stitches and 8 rows equals 10 × 10 cm (4 × 4 inches) after washing and drying flat.

To make your gauge swatch: Chain 28, work 26 double crochet (dc), then continue for at least 12 rows. After the first dc row, alternate between Shell A and Shell B rows.

Each shell repeat should measure approximately 4.4 cm (1.75 inches) wide and 2.5 cm (1 inch) tall. Count 8 foundation positions per repeat.

Measure inside the edges using the fabric as you plan to wear it. If your swatch is too small, go up a hook size. Too large, go down. Wash and dry your swatch the same way you will care for the finished dress.

Important: Hang your dry swatch for 30 minutes and remeasure before choosing your skirt length. Cotton can stretch vertically over time.

Abbreviations and Special Stitches

Here are all the terms used in this pattern. Read through these before starting so nothing catches you off guard.

  • ch = chain
  • dc = double crochet (yarn over, insert hook, pull up loop, yarn over and pull through 2 loops twice)
  • hdc = half double crochet
  • sc = single crochet
  • sl st = slip stitch
  • st(s) = stitch(es)
  • sp = space
  • RS = right side
  • WS = wrong side

dc2tog (double crochet two together): This is a decrease stitch. Begin a dc in each of the next two stitches, keeping the final loop of each on the hook. You will have 3 loops on your hook. Yarn over and draw through all three loops at once. This turns two stitches into one.

Fan: Work 5 dc all into the same stitch. The center dc is stitch 3 of the fan.

Shell A: Creates the openwork lace rows.

Shell B: Restores the base stitch count and fills in between the fans.

Pattern Notes Before You Begin

Read these notes carefully. They will save you confusion later.

  • All stitch counts are written as S / M / L throughout.
  • Work flat and turn at the end of each row.
  • Chain 2 at the start of dc rows. Chain 1 at the start of sc rows.
  • Turning chains and slip joins never count as stitches.
  • The first body row is the RS (right side).
  • At row starts, work the first stitch in the first available stitch unless shaping instructions say otherwise.

For 8 evenly spaced increases: Divide the old stitch count into eight consecutive groups, with group sizes differing by at most one stitch. Work 2 dc in the last stitch of each group and 1 dc in all remaining stitches.

Construction Overview

This dress is built in separate flat panels, then seamed together. Here is the order of construction:

  1. Work the front bodice from waist to shoulders
  2. Work the back bodice from waist to shoulders
  3. Work the front skirt from waist to hem
  4. Work the back skirt from waist to hem
  5. Make both sleeves from top to cuff
  6. Join shoulder seams
  7. Join side seams (leaving opening for zipper on left)
  8. Join waist seams
  9. Set in sleeves
  10. Add edgings and closures

Mark the right side and key edges of each panel as you complete them. This prevents confusion during assembly.

Front and Back Bodice Instructions

Make two identical panels through Row 24. Mark the right side and waist edge of each panel.

Row 1: Ch (68 / 76 / 84). Dc in third ch from hook and in each ch across. You will have (66 / 74 / 82) sts.

Row 2: Increase 8 stitches evenly across the row. You will have (74 / 82 / 90) dc.

Rows 3 through 14: Alternate Shell A and Shell B six times. After Row 14, you will have (74 / 82 / 90) dc.

Shell A Row: Dc in first st, then repeat the following across: ch 2, skip 3 sts, fan in next st, ch 2, skip 3 sts, sc in next st. End with dc in last st. You will have (9 / 10 / 11) fans plus 2 edge dc.

Shell B Row: Dc in first edge st. Working in the direction you encounter them, make 3 dc in each ch-2 sp, 1 dc in the center dc of each fan, and 1 dc in each sc. Dc in last edge st. You will have (74 / 82 / 90) dc.

Row 15: With RS facing, join yarn in the fifth stitch. Work across, leaving the last four stitches unworked. Fasten off the previous row end before joining. You will have (66 / 74 / 82) sts.

Rows 16 through 23: Work Shell A and Shell B four times over the new width. After Row 23, you will have (66 / 74 / 82) dc.

Row 24: Dc across. You will have (66 / 74 / 82) dc.

Front Shoulder Shaping

Row 25: Work the first (22 / 24 / 26) sts and leave the rest unworked. With RS facing, rejoin yarn for the second shoulder and work the last (22 / 24 / 26) sts. Leave the center (22 / 26 / 30) sts open for the neckline.

Work each shoulder independently from here. Keep the armhole edge straight. At the neck edge, decrease by leaving stitches unworked at the end of inward rows, or slip stitch over those stitches at the start of outward rows.

Stitch counts per row:

RowSML
26192123
27171921
28161820
29161820
30161820

Fasten off each shoulder after Row 30.

Back Shoulders and Keyhole Opening

Rows 25 through 28: Work each half separately over (33 / 37 / 41) sts per row. At Row 25, rejoin at the center for the second half. Leave the center edges unjoined to form the back keyhole opening.

Rows 29 through 30: With RS facing, rejoin at the first of the outermost (16 / 18 / 20) sts of each half. Work only that width for two rows, leaving the inner stitches unworked. Fasten off with (16 / 18 / 20) sts per shoulder.

Helpful tip: At the end of each armhole or neck shaping row, place a marker in the last worked stitch. Use these markers to line up your seams during assembly.

Front and Back Skirt Instructions

Make two identical panels. Mark the RS and top edge before beginning the second panel.

Row 1: Ch (68 / 76 / 84). Dc in third ch from hook and in each ch across. You will have (66 / 74 / 82) sts.

Rows 2 through 39: Work Shell A on even rows and Shell B on odd rows. On the four increase rows listed below, first make the normal Shell B stitches, then add one extra dc at each of eight selected placements.

Increase row stitch counts:

Increase RowSML
5748290
7829098
219098106
3798106114

For each increase row, divide the baseline Shell B count into eight consecutive groups of nearly equal size. Work an extra dc in the same sp or st as the final baseline dc of each group.

Row 39 (Final): Shell B without any increases. You will have (98 / 106 / 114) dc.

Length adjustments: For a longer skirt, add complete Shell A/B pairs after the final increase row. For a shorter skirt, remove full pairs while keeping the increase rows evenly spaced.

Before seaming, each skirt panel should measure approximately 49 cm (19.3 inches) from waist to hem.

Sleeve Instructions

Make two sleeves. The first row forms the sleeve top. Work toward the cuff and keep the center of the top edge marked for the shoulder seam.

Row 1: Ch (76 / 84 / 92). Dc in third ch from hook and in each ch across. You will have (74 / 82 / 90) sts.

Rows 2 through 35: Alternate Shell A on even rows and Shell B on odd rows. After the last Shell B, you will have (74 / 82 / 90) dc.

Row 36: Dc across, replacing each of 8 evenly spaced nonoverlapping pairs with dc2tog. You will have (66 / 74 / 82) sts.

Space the decrease pairs by splitting the available stitches into eight groups of nearly equal size. Work dc2tog over the last two stitches of each group.

Fitting tip: Pin the sleeve top into the basted armhole before attaching permanently. Match the marked center to the shoulder seam. Adjust the sleeve foundation chain if your fabric needs more ease. Goal sleeve length is 45 cm (17.7 inches).

Assembly Instructions

Seaming the Dress

You will need Color A yarn, your tapestry needle, and the 3.5 mm hook for optional slip stitch joins.

Join 1 (Shoulders): With RS together, whipstitch each front shoulder to the corresponding back shoulder. You will have (16 / 18 / 20) joined pairs on each side.

Join 2 (Side Seams): On the right side of the dress, seam all 39 skirt row pairs and 14 bodice row pairs. On the left side, leave the first 9 skirt rows and first 10 bodice rows from the waist open for the zipper. You will seam 30 skirt row pairs and 4 bodice row pairs on the left.

Join 3 (Waist): Join the skirt and bodice waist edges with RS together. At the zipper opening, secure the seam ends separately. You will have (132 / 148 / 164) joined waist pairs.

Join 4 (Sleeve Side Seams): Close each sleeve side seam from cuff to top. You will have 36 row pairs per sleeve.

Join 5 (Set In Sleeves): Match each sleeve seam to the underarm and the marked top center to the shoulder. Distribute the stitches evenly around the armhole opening. You will have (74 / 82 / 90) sleeve positions per armhole.

Checkpoint: Waist stitches should match one for one. Side seams should be even. The neckline should open at center back. Try the dress on over your intended slip.

Installing the Side Zipper

You will need the 25 cm nylon coil zipper, matching thread, and a sewing needle.

Baste 1: Align the zipper teeth between the two open edges. Match the waist seam on both sides. Tip the zipper tape toward the WS and baste it in position with two lines of basting stitches.

Seam 2: Backstitch the tape to each edge without catching the teeth. Anchor the tape ends securely, remove the basting, and close the zipper. You will have 2 permanent lines of stitching.

Checkpoint: The zipper should run smoothly and the waist seam should align across both sides. If your closed zipper length differs from the opening, adjust the end of the left skirt seam before sewing permanently.

Edgings and Details

Neckline and Back Opening Edging

You will need Color A yarn, the 3.5 mm hook, and the hook-and-eye closure with matching thread.

Row 1: Start at the upper edge of one side of the back opening. Sc evenly along the back neck, across both shoulder joins, and around the front neck to the opposite side of the opening. You will have (84 / 92 / 100) sc.

Row 2: Turn. Sl st loosely in each sc. Same count as Row 1.

Closure: Sew one hook and one eye opposite each other at the top of the back opening.

Checkpoint: The opening edges should meet without overlapping and the neck should lie flat. Adjust the pickup density evenly before fastening off if the edge seems uneven.

Hem Edging

You will need Color A yarn, the 3.5 mm hook, and a marker for the join.

Round 1: Join at a side seam and work one sc in each hem stitch around. You will have (196 / 212 / 228) sc.

Round 2: Repeat the following around: sl st, skip 1, 5 dc in next st, skip 1. Join at the end. You will have (49 / 53 / 57) scallops.

Cuff Edging

Cuff Round 1: Pick up 1 sc in each cuff stitch and join. You will have (66 / 74 / 82) sc per sleeve.

Cuff Round 2: Work the same 4-stitch repeat as the hem. Use the final 2 stitches to slip stitch back to the join. You will have (16 / 18 / 20) scallops per cuff.

Checkpoint: The edging should lie flat without a drawstring effect. If it curls or cups inward, redo it with a slightly larger hook.

Finishing Your Dress

Weaving Ends and Blocking

Weave every yarn tail back and forth through matching stitches using your tapestry needle. Tuck the hook-and-eye sewing ends on the WS.

Wash or wet-block as directed on your yarn label. Roll in a towel to remove excess water. Ease the dress to the published measurements and pin it flat on your blocking surface. Allow it to dry completely.

Final checkpoint: Measure the bust, waist, hem, and shoulder-to-hem length. Confirm both sleeves are even. Make any seam adjustments after the dress is fully dry.

Care Instructions

Follow the care directions on your yarn label. For washable cotton blends, wash gently in cool water and dry flat. Store the dress folded rather than hanging to prevent the skirt from stretching over time.

Keep the hook-and-eye closure away from young children and pets. Inspect the closure and all seams before each wear.

Always wear a matching opaque slip underneath. Check the coverage and stretch in natural daylight before heading out.

Close view of lavender cotton crochet dress showing detailed shell stitch texture and openwork lace pattern on bodice and sleeves

Tips for Success with This Crochet Dress Pattern

Choose your size carefully. Look at both your bust and waist measurements. Check the skirt width against your hip measurement, which falls roughly 18 to 22 cm below your waist. Baste the panels together and try the dress on before doing your final seaming.

Work a full gauge swatch. Garments require accurate gauge. This is not a step to skip.

Mark everything. The right side, the waist edges, the shoulder centers on your sleeves. These markers save confusion during assembly.

Block before seaming if possible. Flat panels are easier to block than a finished garment.

Take your time with the zipper. Basting first lets you check alignment before committing to permanent stitches.

This lavender scallop lace dress makes a stunning piece for special occasions, warm weather events, or any time you want to feel elegant and put-together. The shell lace construction creates beautiful drape and movement. Once you understand the rhythm of the Shell A and Shell B rows, the work flows naturally.

If you make this dress, save this pattern to your Pinterest boards so you can find it again later. And please leave a comment below to share how your dress turned out. Seeing your finished projects is always a joy.

You Might Also Like

Leave a Comment

Your email address will not be published. Required fields are marked *

*